Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kato, Chiaki
Comprehensive Nuclear Materials, 2nd Edition, Vol.4, p.528 - 563, 2020/08
In spent fuel reprocessing plants, various nitric media are encountered throughout the PUREX process, used in the separation of fission products, uranium, and plutonium. The PUREX process is thus highly corrosive as it takes place at high temperatures under high concentrations of nitric acid solution containing oxidizing metal ions from spent fuel. In this review, the unique chemical properties of nitric acid are first described. Secondly, the process of oxidizing power generation in boiling nitric acid under heat transfer is described using the redox potential and a thermodynamic model of boiling nitric acid. Finally, the corrosion behavior and corrosion acceleration mechanism specific to the reprocessing environments are described from the perspective of solution chemistry.
Ioka, Ikuo; Iwatsuki, Jin; Kuriki, Yoshiro*; Kawai, Daisuke*; Yokota, Hiroki*; Kubo, Shinji; Inagaki, Yoshiyuki; Sakaba, Nariaki
Mechanical Engineering Journal (Internet), 7(3), p.19-00377_1 - 19-00377_11, 2020/06
A thermochemical water-splitting iodine-sulfur processes (IS process) is one of candidates for the large-scale production of hydrogen with high cost performance. Severe corrosive environment which is thermal decomposition of sulfuric acid exists in the IS process. A hybrid material with the corrosion-resistance and the ductility was made by a plasma spraying and laser treatment. The specimen had excellent corrosion resistance in the condition of 95 mass% boiling sulfuric acid. This was attributed to the formation of SiO
on the surface. To confirm the production characteristics of a container using the hybrid material, the container which has a welded part, a chamfer, a curved surface was experimentally made. There was no detachment in the plasma spraying and laser treated layer of the container after the laser treatment. It was confirmed that the construction of the container with high corrosion resistance in sulfuric acid was possible in the hybrid technique.
Satou, Akira; Wada, Yuki; Shibamoto, Yasuteru; Yonomoto, Taisuke
Nuclear Engineering and Design, 354, p.110164_1 - 110164_10, 2019/12
Times Cited Count：8 Percentile：65.94(Nuclear Science & Technology)JAEA has conducted a series of experimental researches on the Post-boiling transition heat transfer, transient critical heat flux and rewetting for BWRs. Experimental data bases covering the anticipated operational conditions was developed; the significance of the precursor cooling was identified. This paper presents approaches of the present research focusing on the anticipated transient without scram, effects of the spacer and physical understanding of the phenomena for development of mechanistic model together with promising results obtained so far.
Kasahara, Shigeki; Chimi, Yasuhiro; Hata, Kuniki; Hanawa, Satoshi
Zairyo To Kankyo, 68(9), p.240 - 247, 2019/09
In order to study environment assisted cracking mechanism of stainless steel under BWR primary coolant condition, effects of applied load on oxidation in the vicinity of crack tips of CT specimens were evaluated. Loaded CT specimens were immersed in an aqueous condition at 290
C as a simulated BWR coolant condition, and microstructural observation on oxide near the tips of pre-cracks was carried out. Oxide inner layers, which consisted of fine grain magnetite containing Fe and Cr were formed, and oxide outer layers consisting of large grains of Fe
O
were observed to cover the inner layers. FEM analysis of stress and strain in the loaded CT specimen suggests that both of dislocations due to localized plastic deformation and elastic strain could play important roles to accelerate inner oxide formation in the vicinity of the crack tip of the specimens.
Segawa, Tomoomi; Kawaguchi, Koichi; Kato, Yoshiyuki; Ishii, Katsunori; Suzuki, Masahiro; Fujita, Shunya*; Kobayashi, Shohei*; Abe, Yutaka*; Kaneko, Akiko*; Yuasa, Tomohisa*
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 9 Pages, 2019/05
A solution of plutonium nitrate and uranyl nitrate is converted into a mixed oxide by microwave heating denitration method. In the present study, for improving the efficiency of microwave heating and achieving high-temperature uniformity to produce homogeneous UO powder, the microwave heating test of potassium chloride and uranyl nitrate solution, and numerical simulation analysis were conducted. The potassium chloride agar was adjusted to the dielectric loss, which is close to that of the uranyl nitrate solution and the optimum support table height was estimated to be 50 mm for denitration of the uranyl nitrate solution by microwave heating. The adiabator improved the efficiency of microwave heating denitration. Moreover, the powder yield was improved by using the adiabator owing to ease of scraping of the denitration product from the bottom of the denitration vessel.
Ioka, Ikuo; Kuriki, Yoshiro*; Iwatsuki, Jin; Kubo, Shinji; Inagaki, Yoshiyuki; Sakaba, Nariaki
Proceedings of 27th International Conference on Nuclear Engineering (ICONE-27) (Internet), 5 Pages, 2019/05
A thermochemical water-splitting iodine-sulfur processes (IS process) is one of candidates for the large-scale production of hydrogen using heat from solar power. Severe corrosive environment which is thermal decomposition of sulfuric acid exists in the IS process. A hybrid material with the corrosion-resistance and the ductility was made by a plasma spraying and laser treatment. The specimen had excellent corrosion resistance in the condition of 95 mass% boiling sulfuric acid. This was attributed to the formation of SiO
on the surface. To confirm the production characteristics of a container using the hybrid material, the container which has a welded part, a chamfer, a curved surface was experimentally made. There was no detachment in the plasma spraying and laser treated layer of the container after the laser treatment.
Kasahara, Shigeki; Fukuya, Koji*; Koshiishi, Masato*; Fujii, Katsuhiko*; Chimi, Yasuhiro
JAEA-Review 2018-012, 180 Pages, 2018/11
JAEA-Review-2018-012.pdf:10.71MB
For structural integrity assessment of reactor internals of light water reactors, it is important to evaluate and predict the property changes of structural materials, based on existing data obtained from austenitic stainless steel irradiated with neutrons. Compilation of the data into tables is valuable for discussing the representative or the most probable values of the properties applied to the assessment. In the process of the data compilation, the data must be distinguished clearly in consideration of different service conditions of core internals of boiling water reactors (BWR) and pressurized water reactors. Main objective of this work is to provide material property tables of irradiated austenitic stainless steel which will be applicable for assessment of structural integrity of core internals of BWRs. To compile the table, published literature reporting irradiated stainless steel data were surveyed and screened by considering the service conditions of BWRs. In addition to the data, various parameters for the data evaluation, e.g. chemical compositions and pre-treatments of the materials, irradiation and examination conditions, were extracted from the literature, and listed into the tables.
Fujita, Shunya*; Abe, Yutaka*; Kaneko, Akiko*; Yuasa, Tomohisa*; Segawa, Tomoomi; Kato, Yoshiyuki; Kawaguchi, Koichi; Ishii, Katsunori
Proceedings of 11th Korea-Japan Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-11) (Internet), 7 Pages, 2018/11
Mixed uranium oxide and plutonium oxide powder is produced from uranyl nitrate and plutonium nitrate mixed solution by the microwave heating denitration method in the spent fuel reprocessing process. Since the microwave heating method is accompanied by a boiling phenomenon, it is necessary to fully grasp the operating conditions in order to avoid flashing and spilling in the mass production of denitrification technology for the future. In this research, it was clarified that the heat transfer coefficient became lower as the dielectric constant increased. The dominant factor of the blowing up phenomena is supposed to be generation of the innumerable bubble rather than bubble's growth.
Uesawa, Shinichiro; Ono, Ayako; Koizumi, Yasuo; Shibata, Mitsuhiko; Yoshida, Hiroyuki
Nihon Kikai Gakkai Netsu Kogaku Konfuarensu 2018 Koen Rombunshu (USB Flash Drive), 6 Pages, 2018/10
no abstracts in English
Soma, Yasutaka; Komatsu, Atsushi; Ueno, Fumiyoshi
Zairyo To Kankyo, 67(9), p.381 - 385, 2018/09
In-situ measurement of electrical conductivity of solution within crevice of SUS316L stainless steel in 288C water has been conducted with newly developed electrochemical sensor system. The sensor measures local electrical conductivity of crevice solution beneath the electrode (
) with electrochemical impedance method. The sensors were installed at different positions within tapered crevice of SUS316L stainless steel. The crevice specimen with the sensors were immerged into 288C, 8 MPa, pure oxygen saturated high purity water for 100 h. at a position with crevice gap of 
59.3
m was 8-11S/cm, least deviate from conductivity of 288C pure water (4.4S/cm) and no localized corrosion occurred. On the contrary, at a position with crevice gap of 4.4m increased with time and showed maximum value of 1600S/cm at 70 h. Localized corrosion occurred in the vicinity of this position. Thermodynamic equilibrium calculation showed of 1600S/cm being equivalent to pH of 3 to 3.7. It can be concluded that acidification occurred in tight crevice even under high purity bulk water and resulted in localized corrosion.
Uesawa, Shinichiro; Ono, Ayako; Koizumi, Yasuo; Shibata, Mitsuhiko; Yoshida, Hiroyuki
Dai-55-Kai Nihon Dennetsu Shimpojiumu Koen Rombunshu (USB Flash Drive), 8 Pages, 2018/05
no abstracts in English
Uesawa, Shinichiro; Koizumi, Yasuo; Shibata, Mitsuhiko; Yoshida, Hiroyuki
Thermal Science and Engineering, 25(4), p.65 - 74, 2017/10
no abstracts in English
Katsuyama, Jinya; Yamaguchi, Yoshihito; Nemoto, Yoshiyuki; Kaji, Yoshiyuki; Osaka, Masahiko
Transactions of the 24th International Conference on Structural Mechanics in Reactor Technology (SMiRT-24) (USB Flash Drive), 11 Pages, 2017/08
It is difficult to assess rupture behavior of the lower head of reactor pressure vessel in boiling-water-type nuclear power plants due to severe accident like Fukushima Daiichi because Boiling Water Reactor (BWR) lower heads have geometrically complicated structure with a lot of penetrations. Therefore, we have been developing an analysis method to predict time and location of RPV lower head rupture of BWRs considering creep damage mechanisms based on coupled analysis of three-dimensional Thermal-Hydraulics (TH) and thermal-elastic-plastic-creep analyses. In this study, we performed creep damage evaluations to investigate the effects of the debris depth and heat generation locations on failure behavior of lower head. From the analysis results, we discussed the outflow paths of the relocated molten core to the containment, and it was concluded that failure regions of BWR lower head are only the control rod guide tubes or stub tubes under simulated conditions.
Fujita, Shunya*; Abe, Yutaka*; Kaneko, Akiko*; Chonan, Fuminori*; Yuasa, Tomohisa*; Yamaki, Tatsunori*; Segawa, Tomoomi; Yamada, Yoshikazu
Proceedings of 25th International Conference on Nuclear Engineering (ICONE-25) (CD-ROM), 8 Pages, 2017/07
From the observation results, in the process of flushing, the behaviors leading to flushing were classified divided into three types. First type is that first generation bubble from heating leads to flushing. Second type is that nucleate boiling continues during heating and stop, finally single bubble generates and leads to flushing. Third type is defined that gradual evaporation occurs without bubbles. It was revealed that the total quantities of heat released by flushing are approximately equal when assuming the flushing mechanism, it can be triggered that a large amount of micro bubbles are instantaneously generated and grew.
Uesawa, Shinichiro; Koizumi, Yasuo; Shibata, Mitsuhiko; Nagatake, Taku; Yoshida, Hiroyuki
Konsoryu, 31(2), p.162 - 170, 2017/06
no abstracts in English
Uesawa, Shinichiro; Koizumi, Yasuo; Shibata, Mitsuhiko; Yoshida, Hiroyuki
Dai-54-Kai Nihon Dennetsu Shimpojiumu Koen Rombunshu (CD-ROM), 8 Pages, 2017/05
no abstracts in English
Uesawa, Shinichiro; Koizumi, Yasuo; Shibata, Mitsuhiko; Yoshida, Hiroyuki
Thermal Science and Engineering, 25(2), p.17 - 26, 2017/04
no abstracts in English
Uesawa, Shinichiro; Koizumi, Yasuo; Shibata, Mitsuhiko; Yoshida, Hiroyuki
Nihon Kikai Gakkai Netsu Kogaku Konfuarensu 2016 Koen Rombunshu (USB Flash Drive), 2 Pages, 2016/10
no abstracts in English
Ueno, Fumiyoshi; Irisawa, Eriko; Kato, Chiaki; Igarashi, Takahiro; Yamamoto, Masahiro; Abe, Hitoshi
Proceedings of European Corrosion Congress 2016 (EUROCORR 2016) (USB Flash Drive), 7 Pages, 2016/09
In this study, we focused on the effect of the boiling of nitric acid solution on the corrosion of a stainless steel-made concentrator in reduced pressure in fuel reprocessing plant. In order to perform the simulation test in a non-radioactive condition, nitric acid solution with the addition of vanadium as an oxidizing metal ion were used. Corrosion tests were carried out under the conditions of boiling at reduced pressure, and of non-boiling at normal pressure and several temperatures. As a result, corrosion was accelerated by the solution boiling while it was not by non-boiling at the same temperature. It was found also that the temperature dependence of corrosion rate is the same in the both conditions of boiling and non-boiling. The corrosion accelerating effect will be discussed on the basis of the reaction among nitric acid, NOx and vanadium, etc.
Uesawa, Shinichiro; Koizumi, Yasuo; Shibata, Mitsuhiko; Yoshida, Hiroyuki
Dai-53-Kai Nihon Dennetsu Shimpojiumu Koen Rombunshu (CD-ROM), 8 Pages, 2016/05
no abstracts in English
